Skip to content

Basic operation

1. Select a receiver lane

A lane is a browser-local ownership and DSP context, not a physical receiver. Choose the lane, route policy, RF frequency, and capture rate before starting the receiver. Two lanes may use independent receivers concurrently; one physical receiver cannot be leased twice.

Starting a lane opens a demand connection. The appliance wakes and verifies the route's serial, then the browser receives CU8 IQ over WebSocket. Opening the page alone does not wake hardware.

2. Tune and inspect

The logical RF capture center describes the received RF span after the route's translation. It is distinct from the commanded tuner center and any physical LO offset. The VFO can move within that capture when its complete passband fits, without a hardware retune. View pan and spectrum span are presentation state; they do not themselves change capture center or VFO. See receiver tuning.

The spectrum and waterfall show dBFS unless a calibrated measurement path is explicitly documented. dBFS is relative to ADC full scale; it is not dBm.

3. Start a decoder

RF Sentry ranks manifested decoders from service-frequency priors, lane input geometry, detector/classifier evidence, and validated decoder output. The strongest compatible candidate is preselected; the operator can always choose a different compatible decoder.

The Start Decoder preflight uses the manifest as source of truth. If a module requires 2.4 MS/s and the lane uses 1.024 MS/s, startup is rejected with the specific lane-local reason.

Auto Start is optional and lane-local. Strong exclusive-frequency priors may run a bounded decoder trial; the trial must produce validated output or time out and cool down. A frequency match alone never becomes a protocol claim.

4. Use intelligence workspaces

  • Station intelligence correlates decoded signals and FCC/license context.
  • Aviation unifies 1090ES and UAT observations by aircraft identity while preserving protocol provenance and capture times.
  • SATCOM → GOES presents HRIT/EMWIN acquisition, assembly, imagery, and retained products separately from generic event rows.
  • Map shows geographic evidence, aircraft, satellites, trails, weather, station relationships, and a reference-time-aware globe.

Changing a workspace does not retune a receiver or stop another decoder.

5. Rewind a signal

Press Space to pause playback and use the timeline to return to a signal you missed. Tune the VFO inside the recorded band to hear what was there at the selected time. The physical receiver keeps collecting samples while you listen to history. Select Go Live to return to the current signal. See IQ DVR controls for retention limits and what happens if browser storage fills.

6. Release the receiver

Stop or release the lane when finished. The lane closes its demand connection; sdr-demandd, not the browser, owns the clean backend shutdown and USB idle policy. Other lanes remain active.

See the operator guide for detailed controls and the troubleshooting guide when acquisition or decoding does not behave as expected.